You’ve just unboxed your brand new EUFY and, after following all the instructions to the letter, you go to turn it on and…it starts spinning in circles? Don’t worry, you’re definitely not alone.
This is a common issue with many people who buy an EUFY. But don’t panic, we’re here to help. In this article, we’ll answer some of the most common questions about why is my EUFY spinning in circles, as well as provide some tips on how to fix the issue. So, read on for information that will have your EUFY up and running perfectly in no time!
- Why Is My EUFY Spinning in Circles?
- Stuck Bumper
- Bumper Sensors
- Malfunctioning Wheels
- Software Issues
- EUFY Vacuum Cleaners and Their Model Range
Why Is My EUFY Spinning in Circles? The Answers You’re Looking For
There are a few reasons why your EUFY might be spinning in circles. We’ll go through each of them below, as well as provide some tips on how to fix the issue.
- Stuck bumper;
- Bumper sensors;
- Malfunctioning wheels;
- Software Issues.
The most common reason why your EUFY is spinning in circles is because the bumper is stuck. The bumper is a plastic strip that runs around the edge of the vacuum cleaner and helps it to detect obstacles.
If this becomes stuck, then the vacuum will think that there are obstacles in its way and will start spinning in circles in an attempt to avoid them.
To fix this, simply remove the bumper and clean it with a damp cloth. Once it’s dry, reattach it to the vacuum and try turning it on again.
Another possible reason why your EUFY is spinning in circles is because of the sensors that are located under the bumper. These sensors help the vacuum to detect obstacles and if they become damaged or dirty, they can cause the vacuum to spin in circles.
To clean the sensors, simply remove the bumper and use a cotton swab dipped in isopropyl alcohol to clean them. Once they’re clean, reattach the bumper and try turning on the vacuum again.
If the wheels on your EUFY are not working properly, this can also cause the vacuum to spin in circles. To fix this, you will need to replace the wheels. You can do this yourself by following these instructions:
- First, remove the screws that hold the wheel in place.
- Next, take out the old wheel and insert a new one.
- Finally, screw the new wheel into place.
- Once you have replaced the wheels, try turning on the vacuum again.
If you have followed all of the above steps and your EUFY still won’t stop spinning in circles, then it’s possible that there is a software issue. In this case, you will need to reset the vacuum.
To do this, simply press and hold the power button for three seconds. Once the vacuum has been reset, try turning it on again.
We hope that this article has helped to answer some of your questions about why is my EUFY spinning in circles.
If you have any further questions or if you’re still having trouble with your vacuum, please don’t hesitate to contact us for assistance.
My EUFY Spinning in Circles: Solutions from Web
In addition to the solutions that we’ve provided above, there are also a number of other things that you can try if your EUFY is spinning in circles. We’ve gathered some of the most popular suggestions from people who have had this problem and listed them below.
I was about to give up on my Eufy and call customer support. I had been dealing with the ‘spinning in circles and backing up’ issue for a while now, and it seemed like no matter what I did, the robot just couldn’t seem to fix the problem. Every time I thought I had finally cleared out all of the dust and dirt that was causing the issue, it would start happening again a few weeks later.
I had read online that others were having the same problem, but none of the solutions seemed to work for me. Then I remembered that one of my friends had told me about a great solution he used for his Eufy – he would take a piece of paper and fold it into a funnel shape, then insert it into the charging port to clean out any build-up of dust or dirt. I tried it out, and it worked like a charm! The robot has been running perfectly ever since.
I was having a bit of trouble with my robot. It seemed like one of the sensors was malfunctioning. I had cleaned all the gears and motors, but it still wasn’t working right. I checked the bumper and even swapped out the left and right motor, but nothing seemed to work. I was starting to get a little frustrated.
Then I remembered that there were two sensors under the pivot wheel on the main board. Maybe that was the problem? I quickly replaced them and sure enough, it worked!
About EUFY Vacuum Cleaners and Their Model Range
EUFY is a Chinese electronics company that was founded in 2014. The company specializes in the manufacture of home appliances and consumer electronics, with a particular focus on robotics.
EUFY’s product range includes vacuum cleaners, air purifiers, and security cameras. At the moment, the model range of EUFY robot vacuum cleaners looks like this:
- Bounce Series;
- X Series;
- L Series;
- G Series.
Thanks for reading!